Truck Bed Volume Calculator
Quick answer: A 6.5-foot truck bed that is 50 inches wide between the wheel wells and 21 inches deep holds 47.4 cubic feet — 1.76 cubic yards, or about 23 bags of mulch at 2 cubic feet per 40-pound bag. Volume is bed length in feet × width in inches × depth in inches ÷ 144.
Pick your bed length or enter a custom one, then add the width between the wheel wells and the bed depth in inches. The calculator returns the bed's volume in cubic feet and cubic yards, plus how many 40-pound bags of mulch fit at 2 cubic feet per bag.
Enter your numbers
Your results
How to use this calculator
Pick your bed length from the list — short 5.5 feet, standard 6.5 feet, or long 8 feet — or choose Custom and enter your own length. Measure the width between the wheel wells at the floor (the narrowest point) and the depth from the bed floor to the top of the rail, both in inches. Results update instantly.
Use the mulch-bag count when ordering bagged material and the cubic-yard figure when ordering bulk material by the yard.
How this is calculated
Cubic feet = bed length (feet) × width (inches) × depth (inches) ÷ 144. The 144 converts square inches to square feet (12 × 12). Cubic yards = cubic feet ÷ 27. Mulch bags = floor(cubic feet ÷ 2), using 2 cubic feet per 40-pound bag as the stated assumption.
Measure width between the wheel wells — the narrowest point — since the bed is wider above them. This calculator measures the bed box only, up to the top of the rails.
Worked example
A 6.5-foot bed, 50 inches wide, 21 inches deep: volume = 6.5 × 50 × 21 ÷ 144 = 6,825 ÷ 144 = 47.4 cubic feet. Cubic yards = 47.4 ÷ 27 = 1.76. Mulch bags = floor(47.4 ÷ 2) = floor(23.7) = 23 bags.
Reference data
| Bed name | Length |
|---|---|
| Short bed | 5.5 ft |
| Standard bed | 6.5 ft |
| Long bed | 8 ft |
Source: common factory bed lengths published by Ford, Chevrolet, and Ram for full-size pickups (2026 build); measure your own bed — widths between wheel wells vary by make and model.
Method & sources
Results are estimates for planning. They are general information, not financial, medical, or professional advice.
Frequently asked questions
How many cubic feet is a 6.5-foot truck bed?
At 50 inches wide between the wheel wells and 21 inches deep, a 6.5-foot bed holds 6.5 × 50 × 21 ÷ 144 = 47.4 cubic feet, or 1.76 cubic yards. Wider or deeper beds hold more — measure your own bed, since widths vary by make and model.
Why measure between the wheel wells?
The wheel wells are the narrowest point of the bed, and they run the full length of the floor. Measuring the full width above the wheel wells overstates the volume at floor level, where mulch, gravel, and other bulk loads actually sit.
How many bags of mulch fit in a truck bed?
Divide the cubic feet by 2: a 47.4-cubic-foot bed fits about 23 bags of 40-pound mulch at 2 cubic feet per bag, loaded level with the bed rails. Heaping the load above the rails adds bags but needs a tarp and can exceed the payload rating.
How many cubic yards is a truck bed?
Divide cubic feet by 27. A 47.4-cubic-foot bed is 1.76 cubic yards, so a standard bed carries just under 2 cubic yards of bulk material loaded level with the rails.
Does the tailgate add volume?
Only if you load above the bed rails or with the tailgate down — this calculator measures the bed box only, up to the top of the rails. Loading above the rails adds volume but raises the center of gravity and needs a tarp or net to keep the load in.