Chandelier Size Calculator

Quick answer: Add the room's length and width in feet to get the chandelier diameter in inches: a 12 by 14 foot room calls for a 26-inch chandelier. Hang it so the bottom sits 30 to 36 inches above a dining table, or 7 feet above the floor in an open room.

Enter the room's length and width, ceiling height, and fixture height to get the chandelier diameter and the drop length that puts the bottom of the fixture at the right height.

Enter your numbers

ft
ft
ft
in
in

Your results

Chandelier diameter—
Bottom height above floor—
Drop / chain length—

How to use this calculator

Measure the room's length and width in feet and the ceiling height, then enter the fixture's height in inches (from the manufacturer's spec). Choose whether the chandelier hangs over a dining table or in open floor space — the target bottom height differs.

Over a table, the fixture should center on the table, and its diameter should stay narrower than the table width. In an open room, the bottom must clear 7 feet so nobody walks into it.

How this is calculated

Diameter (inches) = room length (feet) + room width (feet). Bottom height = table height + 33 inches over a table (the midpoint of the 30–36 inch range), or 84 inches (7 feet) in open floor space. Drop length = ceiling height − bottom height − fixture height, all converted to inches.

The length-plus-width diameter rule is a widely used sizing guideline stated here as a planning rule, not a lighting standard. Very large or two-story rooms often need a larger fixture than the rule suggests.

Worked example

A 12 by 14 foot room with a 10-foot ceiling and a 20-inch-tall fixture in open floor space: diameter = 12 + 14 = 26 inches. Bottom height = 84 inches. Drop = 120 − 84 − 20 = 16 inches of chain or stem.

Reference data

Planning constants used by this calculator: diameter rule = room length + room width (feet → inches); over-table clearance 30–36 inches (33-inch midpoint used for the drop); open-floor clearance 84 inches (7 feet). These are calculator assumptions from standard lighting-layout guidance, not code requirements.

Source: calculator assumptions stated above (2026 build).

Method & sources

Results are estimates for planning. They are general information, not financial, medical, or professional advice.

Frequently asked questions

How do you size a chandelier for a room?

Add the room's length and width in feet — the sum is the chandelier diameter in inches. A 12 by 14 foot room gives a 26-inch chandelier. Treat the result as a center point and allow about 2 inches either way.

How high should a chandelier hang over a dining table?

The bottom of the fixture should sit 30 to 36 inches above the tabletop. Lower feels intimate but blocks sightlines across the table; higher lights the room more evenly but feels less connected to the meal.

How high should a chandelier hang in an entryway?

The bottom should clear 7 feet above the floor so people walk underneath safely. In a two-story entry, hang it so it reads well from both floors, often with the bottom near the second-floor line.

Should a chandelier be smaller than the dining table?

Yes — the fixture diameter should stay under the table's width (and ideally under about two-thirds of it) so it reads as part of the table setting rather than overwhelming it.

Does ceiling height change the chandelier size?

Ceiling height changes the drop length, not the diameter rule — but tall ceilings can carry a larger, taller fixture than the rule suggests, and low ceilings call for a flush or semi-flush fixture instead of a long drop.

Related calculators