Watts Volts Amps Converter

Quick answer: Electrical power follows P = V × I × PF, where P is watts, V is volts, I is amps and PF is the power factor. For example, a 120 V circuit drawing 5 A at a power factor of 1 uses 120 × 5 × 1 = 600 W.

Enter any two of watts, volts and amps, plus the power factor for AC circuits, and this converter finds the third value. Use a power factor of 1.0 for DC circuits and for resistive AC loads such as heaters and incandescent bulbs.

Enter your numbers

Use 1.0 for DC circuits. For AC motors and other inductive loads, check the equipment nameplate for the rated power factor.

Your results

Watts (W)—
Volts (V)—
Amps (A)—
Resistance (V ÷ I, ohms)—

Resistance here is V ÷ I. With a power factor below 1, that value is the apparent resistance of the load, not a pure DC resistance.

How to use this calculator

Choose which pair of values you know, enter them, and set the power factor. The missing value and the resistance update at once.

For a household circuit, volts are the supply voltage (120 V in North America) and amps are what the load draws. For a battery or DC supply, leave the power factor at 1.0.

How this is calculated

The core relation is P = V × I × PF. Rearranged: I = P ÷ (V × PF) and V = P ÷ (I × PF). Resistance comes from Ohm's law, R = V ÷ I.

Input definitions: watts (W) measure real power consumed; volts (V) measure electrical potential; amps (A) measure current; power factor (PF, 0–1) is the fraction of apparent power that does real work in an AC circuit.

Edge cases: a power factor of 0 would make the rearranged formulas divide by zero, so values below 0.01 are rejected. Zero volts with a watts input cannot give a current, and zero amps with a watts input cannot give a voltage — the calculator flags those inputs.

Worked example

120 V, 5 A, PF 1: P = 120 × 5 × 1 = 600 W. Resistance R = 120 ÷ 5 = 24 ohms. With the same circuit at PF 0.8, the same 120 V and 5 A would give P = 120 × 5 × 0.8 = 480 W of real power.

Reference data

Power examples at PF 1 (P = V × I)
VoltsAmpsWattsResistance
12 V2 A24 W6 Ω
120 V5 A600 W24 Ω
120 V10 A1,200 W12 Ω
240 V10 A2,400 W24 Ω

Source: defined constants; values computed from P = V × I and R = V ÷ I; page built 2026.

Method & sources

All figures are computed live from the two formulas above. No external dataset is used, since watts, volts and amps are linked by definition through P = V × I × PF and Ohm's law.

Frequently asked questions

What is the formula for watts, volts and amps?

P = V × I × PF. Watts equal volts times amps times the power factor. Rearranged, amps = watts ÷ (volts × PF) and volts = watts ÷ (amps × PF).

What power factor should I use?

Use 1.0 for DC circuits and for resistive AC loads such as heaters. For AC motors, compressors and other inductive loads, use the power factor printed on the equipment nameplate.

How do I find amps from watts and volts?

Divide watts by volts times the power factor. For example, a 600 W load on 120 V at PF 1 draws 600 ÷ 120 = 5 A.

Why does the calculator also show resistance?

Ohm's law (R = V ÷ I) links the same three quantities, so once volts and amps are known, resistance follows at once. It helps when checking whether a load matches a circuit's rating.

Related calculators