Solar Panel Output Estimator
Quick answer: A 4 kW system (10 panels at 400 W each) in a location with 5 peak sun hours per day produces about 16 kWh per day, or about 5,840 kWh per year, after a 0.80 system derate factor. Daily output equals system size in kW times peak sun hours times 0.80, and annual output is the daily figure times 365. This is an estimate only — shading, panel orientation, and weather change real output.
This solar panel output estimator turns panel wattage, panel count, and your location's peak sun hours into an estimated daily and annual energy yield, so you can size a system or sanity-check a solar quote.
Enter your numbers
Watt rating of one panel, from the panel datasheet.
How many panels the system has.
Average daily peak sun hours for your location (see reference table).
Your results
| System size | 4.00 kW |
|---|---|
| Estimated daily output | 16.0 kWh/day |
| Estimated annual output | 5,840 kWh/year |
| Estimated monthly output | 487 kWh/month |
Estimate only. Shading, roof orientation, tilt, panel temperature, inverter losses, snow, and local weather are not modeled — the 0.80 derate factor is a rough allowance for combined system losses.
How to use this calculator
Enter one panel's wattage, the number of panels, and your average peak sun hours per day. The estimated daily, monthly, and annual output update instantly.
If you do not know your peak sun hours, pick the nearest city from the reference table below, or use 4 as a middle-of-the-road starting point for much of the United States.
How it works
System size (kW) = panel watts × panel count ÷ 1,000. Daily energy (kWh) = system kW × peak sun hours × 0.80, where 0.80 is the system derate factor covering inverter losses, wiring losses, soiling, and temperature effects. Annual energy = daily energy × 365, and monthly energy = annual energy ÷ 12.
Peak sun hours are not hours of daylight — one peak sun hour equals 1 kWh of solar energy per square meter, so a location with 5 peak sun hours receives the energy equivalent of 5 hours at full 1,000 W/m² intensity. Assumptions: panels face an unshaded, well-oriented roof; the 0.80 derate is a single fixed allowance, not a site-specific loss model. Edge cases: a system with 0 panels or 0 peak sun hours produces 0 kWh; very large systems scale linearly in this estimate, which ignores inverter clipping.
Worked example
10 panels × 400 W = 4,000 W = 4 kW. At 5 peak sun hours per day with the 0.80 derate: 4 × 5 × 0.80 = 16 kWh per day. Over a year: 16 × 365 = 5,840 kWh per year.
Reference data
| City | Peak sun hours |
|---|---|
| Phoenix, AZ | 5.7 |
| Los Angeles, CA | 5.3 |
| Denver, CO | 5.0 |
| Miami, FL | 4.9 |
| New York, NY | 3.9 |
| Chicago, IL | 3.8 |
| Seattle, WA | 3.3 |
Source: National Renewable Energy Laboratory (NREL) PVWatts Calculator / National Solar Radiation Database (NSRDB), 2026. Values are long-term average estimates for a fixed-tilt array; your roof's tilt and azimuth shift the result.
Method & sources
The calculator multiplies system kW by peak sun hours and the fixed 0.80 derate factor, then scales daily output to monthly (÷ 12 of annual) and annual (× 365) figures. All outputs are estimates, not production guarantees.
Frequently asked questions
What is a peak sun hour?
One peak sun hour equals 1 kWh of solar energy per square meter — the energy of one hour at full 1,000 W/m² sunlight. A location with 5 peak sun hours gets the same energy as 5 hours of perfect noon sun, spread across the day.
Why is there a 0.80 derate factor?
Real systems lose energy to inverter conversion, wiring, heat, dust, and mismatch between panels. Multiplying by 0.80 is a rough combined allowance for those losses.
How many kWh does a 4 kW system produce per year?
At 5 peak sun hours per day with the 0.80 derate, about 16 kWh per day, or about 5,840 kWh per year. Your location's sun hours change the answer proportionally.
Does shading change the estimate?
Yes, and this calculator does not model it. Even partial shade on one panel can cut a string's output well below this estimate, so treat shaded roofs as lower than the figure shown.
Is this a production guarantee?
No — it is an estimate for planning and quote-checking. A site survey or the NREL PVWatts tool gives a location-specific projection.