Roofing Felt Calculator
Quick answer: Estimate roofing felt rolls: enter roof length, width, and pitch to get the adjusted area and rolls needed. For example, a 40 by 25 foot roof at a 6/12 pitch covers 1,118 square feet after the pitch factor, needing 3 rolls at 400 square feet per roll.
Enter the roof length and width, pick the pitch, and set the coverage per roll. This roofing felt calculator adjusts the flat area for slope and rounds up to whole rolls.
Enter your numbers
Length of one roof slope, eave to ridge side.
Width of the roof slope.
Pitch factor applied to the flat area; see the reference table.
Coverage printed on the roll you plan to buy; edit it to match your product.
Your results
| Flat roof area | 1,000 sq ft |
|---|---|
| Adjusted area (with pitch) | 1,118 sq ft |
| Rolls needed | 3 rolls |
Estimate: the roll count covers the adjusted area with no allowance for overlaps, valleys, or waste. Add an extra roll if your roof has many valleys or hips.
How to use this calculator
Enter length and width, choose the pitch closest to your roof, and check the coverage per roll against your product label. Results update as you type.
Use the adjusted area for ordering felt and the roll count as the minimum order, before any waste allowance.
How it works
Flat area = length ร width. Adjusted area = flat area ร pitch factor, where pitch factor = โ(1 + (rise รท run)ยฒ). Rolls = adjusted area รท coverage per roll, rounded up to the next whole roll (ceil). The pitch factors in the reference table come from that formula: 4/12 โ 1.054, 6/12 โ 1.118, 8/12 โ 1.202, 12/12 โ 1.414.
Assumptions and edge cases: the roof is treated as a single rectangle, so L-shaped or multi-slope roofs need each slope calculated separately and summed. Overlaps between felt courses, valleys, and waste are not included, so the roll count is an estimate. Length, width, and coverage must be above zero.
Worked example
40 ft ร 25 ft at a 6/12 pitch: flat area = 1,000 sq ft. Adjusted area = 1,000 ร 1.118 = 1,118 sq ft. Rolls = 1,118 รท 400 = 2.80, rounded up to 3 rolls.
Reference data
| Pitch | Rise รท run | Pitch factor |
|---|---|---|
| Flat (0/12) | 0 | 1.000 |
| 4/12 | 0.333 | 1.054 |
| 6/12 | 0.500 | 1.118 |
| 8/12 | 0.667 | 1.202 |
| 12/12 | 1.000 | 1.414 |
Source: standard roof pitch geometry (2026) โ pitch factor = โ(1 + (rise รท run)ยฒ); every table value is computed from that formula. Roll coverage of 400 sq ft is the editable default in the calculator, not a fixed product claim; check your roll label.
Method & sources
The calculator uses roof pitch geometry for the adjustment and your own coverage-per-roll input for the roll count. No product-specific coverage is hard-coded as fact.
Frequently asked questions
How do I calculate roofing felt?
Multiply roof length by width for the flat area, multiply by the pitch factor for your slope, then divide by the coverage per roll and round up. A 40 by 25 foot roof at 6/12 pitch needs 1,118 square feet of felt, or 3 rolls at 400 square feet per roll.
What is a pitch factor?
A multiplier that converts flat area to sloped area: โ(1 + (rise รท run)ยฒ). A 6/12 pitch gives 1.118, so a sloped roof needs about 12% more felt than its flat footprint.
Does the roll count include overlaps and waste?
No. Overlaps, valleys, hips, and cutting waste are not included, so treat the result as a minimum and add an extra roll for complex roofs.
What if my roof has multiple slopes?
Calculate each slope separately with its own length, width, and pitch, then add the roll counts together.