Rent Per Square Foot Comparator
Quick answer: Rent per square foot equals monthly rent divided by square feet. A $1,800 apartment at 900 sq ft costs $2.00 per sq ft, while a $2,100 apartment at 1,200 sq ft costs $1.75 per sq ft — so the second, larger listing is cheaper by $0.25 per sq ft even though its total rent is higher. Enter two listings below to see which one gives you more space for the money.
This rent per square foot comparator puts two listings side by side on the one metric that adjusts for size: monthly rent divided by square feet. A higher total rent can still be the better deal if it buys enough extra space.
Enter your numbers
Monthly rent for the first listing.
Livable area of the first listing.
Monthly rent for the second listing.
Livable area of the second listing.
Your results
| Listing A — rent per sq ft | $2.00 / sq ft |
|---|---|
| Listing B — rent per sq ft | $1.75 / sq ft |
| Cheaper per sq ft | Listing B |
| Difference | $0.25 / sq ft |
Rent per square foot compares space value only. Location, condition, utilities, fees, and lease terms are not included — weigh those separately.
How to use this calculator
Enter the monthly rent and square footage for each listing. The calculator shows each listing's rent per square foot, names the cheaper one, and gives the gap between them.
Use the same rent basis for both listings — either both before utilities or both including the same utilities — so the comparison stays fair.
How it works
Rent per square foot = monthly rent ÷ square feet, computed separately for each listing. The cheaper listing is the one with the lower $/sq ft figure, and the difference is the absolute gap between the two figures.
Assumptions: the square-foot figures describe comparable livable area for both listings, and the rents cover the same inclusions. Edge cases: a listing with 0 square feet cannot be compared and shows an error; equal $/sq ft values are reported as a tie, with a $0.00 difference.
Worked example
Listing A: $1,800 ÷ 900 sq ft = $2.00 per sq ft. Listing B: $2,100 ÷ 1,200 sq ft = $1.75 per sq ft. Listing B is cheaper per square foot by $2.00 − $1.75 = $0.25 per sq ft, even though its total monthly rent is $300 higher.
Reference data
| Monthly rent | Size | Rent per sq ft |
|---|---|---|
| $1,500 | 750 sq ft | $2.00 |
| $1,800 | 900 sq ft | $2.00 |
| $2,100 | 1,200 sq ft | $1.75 |
| $2,400 | 1,000 sq ft | $2.40 |
Source: computed from the rent-per-square-foot formula on this page (2026); no external data used.
Method & sources
Each listing's $/sq ft value is its monthly rent divided by its square feet, rounded to cents. The winner is the lower value; the difference is the absolute difference of the two values.
Frequently asked questions
How do you calculate rent per square foot?
Divide the monthly rent by the listing's square footage. For example, $1,800 ÷ 900 sq ft = $2.00 per sq ft.
Is a lower rent per square foot always the better deal?
Not always. It means more space for the money, but location, condition, utilities, fees, and lease terms also matter and are not in this number.
What if the two listings tie?
If both listings have the same $/sq ft, the calculator reports a tie with a $0.00 difference — then decide on location and amenities.
Should utilities be included in the rent figure?
Use the same basis for both listings: either both rents excluding utilities, or both including the same utilities, so the comparison stays fair.
Can I compare a studio with a two-bedroom?
Yes — that is exactly what $/sq ft is for. It strips out size so a small and a large unit can be judged on space value, though layout and room count still matter.