Rabbit Hutch Size Calculator

Quick answer: The Rabbit Welfare Association's minimum for one average rabbit is a 6 by 2 foot hutch (12 square feet) plus an 8 by 4 foot run (32 square feet). For two medium rabbits, allow 18 square feet of hutch and a 48-square-foot run — and remember these are minimums, not ideals.

Enter how many rabbits you keep and their size to get the minimum hutch and run areas they need, with suggested dimensions for each.

Enter your numbers

rabbits

Your results

Hutch area (minimum)—
Run area (minimum)—
Total enclosure—

How to use this calculator

Enter the number of rabbits and their size class. The calculator starts from the Rabbit Welfare Association minimum for one rabbit and adds 50% more hutch area and 16 square feet more run per extra rabbit.

Arrange the hutch and run so rabbits can move between them at all times — a hutch used only at night and a run used only by day do not add up to the minimum.

How this is calculated

Hutch area = base hutch area × (1 + 0.5 × (rabbits − 1)), where the base is 10, 12, or 15 square feet for small, medium, or large rabbits. Run area = 32 + 16 × (rabbits − 1) square feet. Suggested hutch dimensions assume a 2-foot depth; suggested run dimensions assume an 8-foot width.

The base figures follow the Rabbit Welfare Association (RWAF) minimum guidance: a 6 × 2 foot hutch and an 8 × 4 foot run for one average rabbit, with 2 feet of hutch height so rabbits can stand upright.

Worked example

Two medium rabbits: hutch = 12 × (1 + 0.5 × 1) = 18 square feet (for example, 9 × 2 feet). Run = 32 + 16 × 1 = 48 square feet (for example, 8 × 6 feet). Total minimum enclosure = 66 square feet.

Reference data

Reference: Rabbit Welfare Association and Fund (RWAF) minimum housing guidance — 6 × 2 × 2 foot hutch plus 8 × 4 foot run for one average rabbit, with permanent access between hutch and run. Extra rabbits scale as stated in the method above.

Source: Rabbit Welfare Association (RWAF) housing guidance. Page built 2026.

Method & sources

Results are estimates for planning. They are general information, not financial, medical, or professional advice.

Frequently asked questions

How big should a rabbit hutch be?

The RWAF minimum for one average rabbit is 6 × 2 × 2 feet (12 square feet) plus an 8 × 4 foot run. That is a floor, not a goal — rabbits confined to the minimum with no run access are not adequately housed.

Do rabbits need a run all the time?

Yes — permanent access to the run, day and night, is part of the RWAF guidance. A hutch-only setup, or a run offered for a few hours a day, does not meet the minimum.

Can two rabbits share one hutch?

Yes, bonded pairs commonly share, but the space must grow: this calculator adds 50% more hutch area and 16 square feet more run per extra rabbit. Unbonded rabbits must never share.

How tall should a rabbit hutch be?

At least 2 feet, so rabbits can sit fully upright with ears up. Large breeds need more — measure your rabbit sitting upright and add clearance.

Is indoor housing different?

Indoor rabbits need the same total space, delivered as a pen or rabbit-proofed room rather than a hutch. A cage alone, however large, is not a substitute for a run.

Related calculators