Pond Volume Calculator

Quick answer: A rectangular pond 10 ft long, 8 ft wide, and 3 ft deep on average holds 240 cubic feet, which is 1,795.32 gallons (6,796.04 liters). Volume is length times width times average depth for a rectangle, times pi/4 for an oval, and pi times radius squared times depth for a circle.

Enter your pond's shape and measurements and this pond volume calculator returns volume in cubic feet, US gallons, and liters, so you can size pumps, liners, and treatments.

Enter your numbers

ft

For a circle, enter the diameter here; the width field is not used.

ft
ft

Your results

Volume240 cubic feet
Volume in gallons1,795.32 gallons
Volume in liters6,796.04 liters

Results are exact from the measurements entered; the only estimate is how well your average depth represents the pond.

How to use this calculator

Choose the shape closest to your pond, then enter length, width, and average depth in feet. For a circle, enter the diameter as the length. Read the volume in cubic feet, gallons, and liters.

To find average depth, take depth readings at several spots, add them, and divide by the number of readings. Do not enter the deepest point alone.

How this is calculated

Rectangle: volume = length × width × average depth. Oval: volume = (pi / 4) × length × width × average depth. Circle: volume = pi × (diameter / 2)² × average depth. Gallons = cubic feet × 7.48052. Liters = gallons × 3.78541.

Assumptions: the pond sides are treated as vertical for the stated shape, and average depth stands in for the sloped bottom. Edge cases: a pond with steep sloped sides holds less than this result, and an irregular pond should be split into parts and added.

Worked example

Rectangle, 10 ft × 8 ft × 3 ft average depth: volume = 10 × 8 × 3 = 240 cubic feet; gallons = 240 × 7.48052 = 1,795.32 gallons; liters = 1,795.32 × 3.78541 = 6,796.04 liters.

Reference data

Volume conversion constants
ConversionValue
1 cubic foot to US gallons7.48052 gallons
1 US gallon to liters3.78541 liters
1 cubic foot to liters28.3168 liters

Source: defined constants; page built 2026. Conversion values per the National Institute of Standards and Technology (NIST) unit definitions (2026).

Method & sources

The method applies the shape formula above to the entered measurements, then converts cubic feet to gallons and liters with the constants in the reference table. No measurement is fetched from any outside source.

Frequently asked questions

How is pond volume calculated?

For a rectangle, volume is length times width times average depth. For an oval, multiply that result by pi divided by 4 (0.7854). For a circle, use pi times radius squared times average depth, where radius is half the diameter.

Why use average depth instead of maximum depth?

Pond bottoms slope, so the deepest point overstates the volume. Average depth is the mean of several depth readings across the pond, and it gives a volume that matches the water the pond holds.

How many gallons are in a cubic foot?

One cubic foot holds 7.48052 US gallons. This calculator multiplies cubic feet by 7.48052 to get gallons, then multiplies gallons by 3.78541 to get liters.

What if my pond has an irregular shape?

Split it into rectangles and ovals, calculate each part, and add the parts together. For a rough shape, a rectangle using the longest length and widest width gives an upper-bound estimate.

Related calculators