Hedge Plant Calculator
Quick answer: Divide the hedge length by the spacing between plants and round up: a 30 ft hedge with plants spaced 2 ft apart needs 15 plants. If you want a plant at both ends of the row, add one extra plant, for 16 in that example. Enter your hedge length and spacing below to get your count.
This hedge plant calculator turns a hedge length and a plant spacing into the number of plants to buy, with an option to add one extra plant so the row starts and ends with a plant.
Enter your numbers
Total length of the hedge row.
Center-to-center distance between plants.
Your results
| Plants needed (spacing intervals) | 15 plants |
|---|---|
| Plants with one at both ends | 16 plants |
| Actual spacing if plants are spread evenly | 2.00 ft |
Buy one or two spare plants for replacements — a small share of new hedging plants fail in the first season.
How to use this calculator
Enter the hedge length and the spacing between plants. The calculator rounds up to whole plants, since you cannot buy part of a plant.
Use the "both ends" figure if you want the row to start and end with a plant rather than a gap. Check the spacing your plant variety recommends — dense hedging shrubs are often planted 1–3 ft apart, depending on species and the mature width you want.
How it works
Plants = ceil(hedge length ÷ spacing). Rounding up matters: a 31 ft hedge at 2 ft spacing needs ceil(15.5) = 16 plants, because 15 plants leave a gap. The "both ends" count adds 1 to cover a plant at each end of the row. The even-spacing figure spreads the base count across the full length: length ÷ (plants − 1) when there is more than one plant.
Assumptions: plants sit in a single straight row at even spacing, and the spacing figure is center-to-center. Edge cases: a hedge shorter than the spacing still needs 1 plant (2 with both ends); a spacing of 0 is invalid and shows an error.
Worked example
30 ft hedge ÷ 2 ft spacing = 15 plants. With a plant at both ends: 15 + 1 = 16 plants. Spread evenly with both ends planted, the spacing becomes 30 ÷ (16 − 1) = 2.00 ft.
Reference data
| Hedge length | Spacing | Plants | With both ends |
|---|---|---|---|
| 20 ft | 2 ft | 10 | 11 |
| 30 ft | 2 ft | 15 | 16 |
| 50 ft | 3 ft | 17 | 18 |
| 100 ft | 2.5 ft | 40 | 41 |
Source: computed from the ceil(length ÷ spacing) formula on this page (2026); no external data used.
Method & sources
The calculator divides hedge length by spacing and rounds up to the next whole plant. The both-ends figure adds 1, and the even-spacing figure divides the length by plants minus 1.
Frequently asked questions
How many plants do I need for a 30 ft hedge?
At 2 ft spacing, 30 ÷ 2 = 15 plants. Add one more (16 total) if you want a plant at both ends of the row.
Why round up instead of rounding to the nearest plant?
Rounding down leaves a gap at the end of the row. Rounding up guarantees full coverage, and the plants simply sit a little closer together.
What spacing should I use for a hedge?
Follow the mature width of your species — dense hedging shrubs are often planted 1–3 ft apart, with wider spacing for large species. The nursery tag or a local extension office gives the figure for your plant.
Should I add a plant at both ends?
Yes if you want the hedge to start and end with a plant rather than a half-gap. It costs one extra plant and gives a finished look.
What if my hedge is not a straight line?
Measure the total length along the planting line, including curves, and enter that total. For an L-shaped hedge, add the two legs together.