FFMI Calculator

Quick answer: A person 180 cm tall weighing 85 kg at 15% body fat has 72.25 kg of lean mass and an FFMI of 22.30 kg/m². Because the height is exactly 1.80 m, the normalized FFMI is also 22.30 kg/m². Enter your height, weight, and body fat percent to get lean mass, FFMI, and normalized FFMI.

This FFMI calculator converts your weight and body fat percent into lean mass, then divides by height squared to give the fat-free mass index, plus the height-normalized version used for comparing people of different heights.

Enter your numbers

cm

Your height in centimeters.

kg

Your total body weight in kilograms.

%

Body fat percent from a measurement method of your choice.

Your results

Lean mass—
Fat mass—
FFMI—
Normalized FFMI—

FFMI depends on the accuracy of the body fat percent you enter. Different measurement methods give different body fat values, so compare FFMI figures only when the method is the same.

How to use this calculator

Enter height in centimeters, weight in kilograms, and body fat percent. The results update as you type.

Use normalized FFMI when comparing people of different heights: it adjusts FFMI to a reference height of 1.80 m. For a person exactly 1.80 m tall, FFMI and normalized FFMI are equal.

How this is calculated

Lean mass (kg) = weight (kg) × (1 − body fat percent ÷ 100). Fat mass (kg) = weight − lean mass. FFMI (kg/m²) = lean mass ÷ (height in meters)², where height in meters = height in centimeters ÷ 100.

Normalized FFMI = FFMI + 6.1 × (1.8 − height in meters). The 6.1 adjustment factor and the 1.80 m reference height come from the published FFMI normalization convention. The calculator assumes the entered body fat percent is correct; it does not estimate body fat itself.

Worked example

Inputs: height 180 cm (1.80 m), weight 85 kg, body fat 15%. Lean mass = 85 × (1 − 0.15) = 85 × 0.85 = 72.25 kg. Fat mass = 85 − 72.25 = 12.75 kg. FFMI = 72.25 ÷ 1.80² = 72.25 ÷ 3.24 = 22.30 kg/m². Normalized FFMI = 22.30 + 6.1 × (1.8 − 1.8) = 22.30 kg/m².

Reference data

FFMI reference values
ItemValue
FFMI formulaLean mass (kg) ÷ height (m)²
Normalized FFMI formulaFFMI + 6.1 × (1.8 − height in meters)
Reference height for normalization1.80 m
Worked example resultLean mass 72.25 kg; FFMI 22.30; normalized FFMI 22.30

Source: FFMI and normalized FFMI formulas from Kouri et al. fat-free mass index literature, as summarized in 2026 reference sources; page built 2026.

Method & sources

The calculator applies only the formulas stated in “How this is calculated” to the numbers you enter.

Frequently asked questions

What is FFMI?

FFMI is lean mass divided by height squared. It expresses how much muscle and other lean tissue a person carries relative to height, unlike BMI, which includes fat mass.

What is normalized FFMI?

Normalized FFMI adjusts FFMI to a reference height of 1.80 m using FFMI + 6.1 × (1.8 − height in meters), so people of different heights can be compared on the same scale.

How accurate is my FFMI result?

Only as accurate as the body fat percent entered. Skinfold, bioimpedance, DEXA, and other methods give different body fat values, and each difference flows straight into lean mass and FFMI.

Is a higher FFMI always better?

No. FFMI is a descriptive index, not a health score. Interpret it alongside training, health, and body composition goals, not as a target on its own.

Related calculators