Countertop Square Footage Calculator

Quick answer: A 96-inch by 25-inch countertop section is 16.67 square feet, and a 48-inch by 25-inch section is 8.33 square feet, for a total of 25.00 square feet. Enter each rectangular section in inches and add backsplash height and length to get its area too. The calculator divides square inches by 144 to get square feet.

This countertop square footage calculator adds up to two rectangular countertop sections and, when you enter it, the backsplash area, so you can compare quotes and material quantities on the same square-foot basis.

Enter your numbers

in

The long side of the first rectangle, in inches.

in

The depth of the first rectangle, in inches.

in

Enter 0 when there is only one section.

in

The depth of the second rectangle, in inches.

in

Backsplash height in inches; 0 skips the backsplash.

ft

Backsplash run length in feet.

Your results

Section 1 areaโ€”
Section 2 areaโ€”
Total countertop areaโ€”
Backsplash areaโ€”
Total area (countertop + backsplash)โ€”

Areas are exact for rectangles. L-shaped counters are split into two rectangles here; irregular shapes and sink cutouts are not deducted, so treat the result as a gross area for quoting.

How to use this calculator

Measure each straight run as a rectangle: length and depth in inches. For an L-shaped counter, measure the two rectangles separately and enter them as section 1 and section 2.

Leave section 2 at 0 for a single straight run. Add backsplash height and length only when the backsplash is part of the same material order.

How this is calculated

Section area (sq ft) = length (in) ร— width (in) รท 144, since 1 sq ft = 144 sq in. Total countertop area = section 1 area + section 2 area. Backsplash area (sq ft) = height (in) ร— length (ft) ร— 12 รท 144 = height (in) ร— length (ft) รท 12.

Assumptions: both sections are rectangles, measurements are in inches (backsplash length in feet), and sink or cooktop cutouts are not subtracted. Overlaps where two rectangles meet must be avoided by measuring the second rectangle only up to the edge of the first.

Worked example

Inputs: section 1: 96 in ร— 25 in; section 2: 48 in ร— 25 in; no backsplash. Section 1 = 96 ร— 25 รท 144 = 16.67 sq ft. Section 2 = 48 ร— 25 รท 144 = 8.33 sq ft. Total = 16.67 + 8.33 = 25.00 sq ft. Backsplash = 0 sq ft.

Reference data

Countertop area reference values
ItemValue
Square inches per square foot144 (defined conversion)
Section 1 in the worked example (96 in ร— 25 in)16.67 sq ft
Section 2 in the worked example (48 in ร— 25 in)8.33 sq ft
Backsplash formulaHeight (in) ร— length (ft) รท 12 = sq ft

Source: Defined constants: 1 sq ft = 144 sq in; page built 2026.

Method & sources

The calculator uses only the defined square-inch-to-square-foot conversion and the rectangle area formula stated above.

Frequently asked questions

How do I measure an L-shaped countertop?

Split it into two rectangles, measure each one, and enter them as section 1 and section 2. Measure the second rectangle only up to the edge of the first so the corner is not counted twice.

Are sink cutouts deducted?

No. The result is a gross rectangle area. Fabricators quote on gross area in many cases, but ask your supplier whether cutouts are deducted from your quote.

How many square feet is 96 inches by 25 inches?

16.67 square feet: 96 ร— 25 = 2,400 square inches, divided by 144.

What units do I enter?

Section lengths and widths in inches, and backsplash length in feet. The calculator converts everything to square feet.

Related calculators