Cold Brew Ratio Calculator

Quick answer: Cold brew water equals coffee weight times the ratio. For example, 100 g of coffee at a 1:10 ratio needs 1,000 ml of water and makes 4 servings of 250 ml. A 1:8 ratio makes concentrate that you dilute before serving; 1:10 to 1:15 makes ready-to-drink cold brew.

Enter your coffee grounds in grams and pick a ratio, and the calculator gives the water volume and the number of 250 ml servings. Enter a water volume instead and it works backwards to the grounds you need.

Enter your numbers

g
ml

Leave blank to calculate from grounds. If entered, the grounds needed for this water volume are shown instead.

Your results

Water neededโ€”
Coffee groundsโ€”
Servings (250 ml each)โ€”
Brew typeโ€”

Servings are counted on the brewed volume at 250 ml each. Concentrate (1:8) is diluted with an equal part of water or milk before serving, so the finished drink count is higher after dilution.

How to use this calculator

Enter your coffee grounds in grams and pick a ratio. The water volume and servings update at once. To start from a container size instead, enter the water volume in the reverse field and the grounds you need appear in the results.

For concentrate, brew at 1:8 and dilute the finished concentrate with an equal part of water or milk when serving. For ready-to-drink cold brew, 1:10 to 1:15 is the range this calculator covers.

How this is calculated

Water (ml) = coffee grounds (g) ร— ratio, treating 1 g of water as 1 ml. Servings = water รท 250. The reverse direction is grounds = water รท ratio.

Input definitions: grounds are weighed in grams before grinding; the ratio is parts of water per 1 part of coffee by weight; servings are 250 ml glasses of brewed coffee.

Assumptions and limits: ground coffee absorbs some water, so the strained yield is slightly less than the water added โ€” the calculator reports the water to add, not the strained yield. Ratios below 1:8 make very strong concentrate and ratios above 1:20 make a weak brew; the custom field accepts any ratio of 1 or more.

Worked example

100 g coffee at 1:10: water = 100 ร— 10 = 1,000 ml; servings = 1,000 รท 250 = 4 servings of 250 ml. Reversed: 1,000 ml of water at 1:10 needs 1,000 รท 10 = 100 g of coffee.

Reference data

Water needed per 100 g of coffee, by ratio
RatioWater per 100 gBrew typeServings (250 ml)
1:8800 mlConcentrate โ€” dilute before serving3.2
1:101,000 mlReady to drink4
1:151,500 mlReady to drink, lighter6

Source: defined ratios; water volumes computed from the ratio definition; page built 2026.

Method & sources

All figures follow from the ratio definition: water equals grounds times the ratio. The 250 ml serving size is the calculator's stated serving definition, and the concentrate note reflects the standard practice of diluting 1:8 concentrate before serving.

Frequently asked questions

What ratio should I use for cold brew?

Use 1:8 if you want concentrate to dilute before serving, or 1:10 to 1:15 for ready-to-drink cold brew straight from the jar.

How much water does 100 g of coffee need?

At 1:10, 100 g of coffee needs 1,000 ml of water and makes 4 servings of 250 ml. At 1:8 it needs 800 ml, and at 1:15 it needs 1,500 ml.

Do I count the water the grounds absorb?

This calculator gives the water to add. Ground coffee absorbs some water, so the strained yield is slightly less than the water added โ€” add a small splash extra if you need an exact final volume.

Can I work backwards from my container size?

Yes. Enter the water volume in the reverse field and the calculator shows the grounds needed at your chosen ratio.

Related calculators