Blinds Measurement Calculator
Quick answer: For an inside mount, measure the width at the top, middle, and bottom of the window frame and order the narrowest measurement minus a 1/4-inch clearance deduction. For an outside mount, order the window width plus 6 inches (3 inches of overlap per side) and the height plus 3 inches above the frame.
Blinds are cut to the size you order, so measuring right matters more than anything else. Enter your window measurements and mount type to get the exact width and height to order.
Enter your numbers
Your results
How to use this calculator
For an inside mount, measure the inside width of the frame at the top, middle, and bottom with a steel tape, and measure the height on both sides. Frames are rarely square, so the narrowest width and the longest height are the ones that matter.
For an outside mount, measure the window opening width once and the height from where the headrail will sit (about 3 inches above the frame) down to the sill. Enter your per-side overlap — 3 inches per side is the usual planning value and is adjustable here.
How this is calculated
Inside mount: order width = minimum(top, middle, bottom widths) − 0.25 inch clearance deduction. Order height = measured frame height. Outside mount: order width = window width + 2 × per-side overlap; order height = window height + 3 inches for headrail clearance above the frame.
The 1/4-inch inside-mount deduction is this calculator's planning assumption, matching the clearance most manufacturers build in; always confirm the deduction your chosen brand applies before ordering.
Worked example
Inside-mount measurements of 35.5, 35.25, and 35.375 inches: the narrowest is 35.25 inches, so order width = 35.25 − 0.25 = 35.00 inches. With a 48-inch frame height, order 35 × 48 inches.
Reference data
Planning constants used by this calculator: inside-mount clearance deduction 1/4 inch; outside-mount headrail allowance 3 inches; default per-side overlap 3 inches. These are calculator assumptions drawn from standard blind-measuring guides — confirm the deduction your manufacturer applies, since brands differ.
Source: calculator assumptions stated above (2026 build).
Method & sources
Results are estimates for planning. They are general information, not financial, medical, or professional advice.
Frequently asked questions
Should I measure blinds in inches or centimeters?
Inches, to the nearest 1/8 inch. Blinds are cut to the ordered size, so a rounded measurement can leave a gap or a blind that does not fit. Use a steel tape measure, not a cloth one.
Why measure the width in three places?
Window frames are rarely perfectly square — a frame can be 1/4 inch narrower at the bottom than the top. Ordering the narrowest measurement guarantees the blind fits at every point.
What is the difference between inside and outside mount?
An inside mount hangs within the window frame for a clean, built-in look and needs an exact fit. An outside mount hangs on the wall or trim over the frame, hides an unattractive frame, and blocks more light at the edges.
Do manufacturers deduct from inside-mount widths?
Most do — a small clearance deduction (often 1/4 inch total) so the blind operates freely inside the frame. This calculator applies a 1/4-inch deduction; check your brand's policy, since some deduct nothing and expect you to order the exact frame width.
How high above the window should an outside mount go?
About 3 inches above the frame is a good planning value: it gives the headrail room and makes the window look taller. For a blackout effect, extend the blind past the sill as well.