Aquarium Lighting Calculator
Quick answer: For a planted aquarium, plan roughly 1.0 watt of LED per gallon for low-light plants, 1.5 watts for medium light, and 2.0 watts for high light. A 20-gallon medium-light tank therefore needs about 30 LED watts — roughly 2,700 lumens at 90 lumens per watt.
Enter your tank size and planting level to estimate the LED wattage and lumens your aquarium needs, plus a suggested daily photoperiod for the plants.
Enter your numbers
Your results
How to use this calculator
Enter the tank's water volume in gallons and pick the planting level that matches your plants. Low-light plants thrive under modest light; carpeting plants and CO2-injected tanks need the high-light level.
Run the light on a timer for the suggested photoperiod and adjust from there: algae often means too much light or too long a photoperiod, while leggy, pale plants mean too little.
How this is calculated
LED watts = tank gallons × watts-per-gallon factor: 1.0 for low light, 1.5 for medium light, 2.0 for high light. Lumens = watts × 90 lumens per watt, a mid-range LED efficacy assumption. Photoperiod guidance is 8 hours for low light, 8–9 hours for medium light, and 9–10 hours for high light.
These factors are planning assumptions for LED fixtures. Older watts-per-gallon rules were written for fluorescent tubes and do not transfer directly to LEDs, which is why this calculator states its LED basis explicitly.
Worked example
A 20-gallon medium-light tank: watts = 20 × 1.5 = 30 W of LED. Lumens = 30 × 90 = 2,700 lumens, on an 8–9 hour photoperiod.
Reference data
Planning constants used by this calculator: LED factors 1.0 / 1.5 / 2.0 watts per gallon for low / medium / high light; LED efficacy 90 lumens per watt; photoperiods 8 / 8–9 / 9–10 hours. These are calculator assumptions for planning, not manufacturer ratings — check your fixture's rated lumens before buying.
Source: calculator assumptions stated above (2026 build).
Method & sources
Results are estimates for planning. They are general information, not financial, medical, or professional advice.
Frequently asked questions
How many watts of LED do I need per gallon?
As a planning rule: about 1.0 watt per gallon for low-light plants, 1.5 for medium light, and 2.0 for high light. These LED factors replace the older fluorescent watts-per-gallon rule, which overstated LED needs.
How many lumens does a planted tank need?
Multiply LED watts by about 90 lumens per watt. A 20-gallon medium-light tank at 30 watts works out to roughly 2,700 lumens. Fixture efficacy varies, so check the rated lumens on the box.
How long should aquarium lights stay on?
8 hours for low light, 8–9 hours for medium light, and 9–10 hours for high light. Longer photoperiods grow algae faster than plants once the plants have had enough light.
Do fish-only tanks need less light?
Yes — fish-only tanks need light only for viewing, so a low-output fixture on a shorter photoperiod is enough. The levels in this calculator target planted tanks.
Does tank depth change the lighting need?
Yes. Light weakens with depth, so tall tanks need stronger fixtures or lights mounted closer to the water than the watts-per-gallon rule alone suggests. For tanks over 24 inches tall, step up one light level.